Welcome, Guest

Author Topic: A10-LIME + LCD-10TS - Script.bin/fex setup  (Read 1223 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
A10-LIME + LCD-10TS - Script.bin/fex setup
« on: September 03, 2016, 01:00:06 PM »

just purchased LCD-OLinuXino-10TS together with the A10-OLinuXino-LIME-4GB.

I am not able to run the pre-defined script to change the resolution from hdmi to lcd.

Could you please assist in the right parameters inside script.bin/fex to set
up the LCD-OLinuXino-10TS ?

I need to write the right parameters within "[disp_init]" and "[lcd0_para]" and more if needed.
(Dunno exactly what the pre-defined script changes - but need to do that manually)

The http://linux-sunxi.org/Fex_Guide#resistive_touch_panel_configuration is
not able to tell the right parameters only giving examples on how to.

Tried already on my own, but having not the right resolution and heavy flickering after booting.

thanks for your help,