Welcome, Guest

Author Topic: OLIMEX 328 + Dragino Shield  (Read 1266 times)


  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
OLIMEX 328 + Dragino Shield
« on: July 13, 2016, 11:02:53 AM »

I have a OLIMEX328, and I d like to use this one with "Yun Dragino Shield"


Could you say me if it is ok ? could I plug in this shield withou risk ?
I also remark that the "Yun Dragino  shield" has morte pin as the OLIMEX-328  spin header?

And I d like also to use 2 shield together with my Olimex-328 :
 - EKG Shield (https://www.olimex.com/Products/Duino/Shields/SHIELD-EKG-EMG/)
 - Yun Dragino

How to proceed ? first Yun Dragino, and then above EKG shield



  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1643
  • Karma: +42/-2
Re: OLIMEX 328 + Dragino Shield
« Reply #1 on: July 13, 2016, 01:42:51 PM »
The Dragino shield would not fit OLIMEXINO-328 out-of-the-box. The Dragino shield that you linked seems to use the SPI of an additional connector (under the ICSP pins). OLIMEXINO-328 has no provision for it - the ICSP pins of OLIMEXINO-328 are not under that connector. You would probably have to use wires for this SPI connection.

Best regards,
Technical support and documentation manager at Olimex