Welcome, Guest

Author Topic: Shield For Olinuxino A10 LIME  (Read 1966 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Shield For Olinuxino A10 LIME
« on: February 26, 2016, 11:08:45 PM »
Does anybody know how to get GPIOs out of the board? The connector is too small for poor hobbysts
I bought the board without noting that the step of the connector is not prototyping-friendly..(0.05'' !!!!)
Moreover, the board does not have the audio output jack...
There are shields for this board?