Welcome, Guest

Author Topic: a10 eagle lib  (Read 2160 times)

elsharkawey

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
a10 eagle lib
« on: December 26, 2015, 09:01:58 PM »
hi
i want a10 library for eagle software can someone help i searched in google but i did't find it :(

dmsherazi

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
Re: a10 eagle lib
« Reply #1 on: January 11, 2016, 07:49:24 PM »
You can copy it from any of the Olixuino A10 board eagle files that olimex provides.

Step1: use the group tool and select the A10 in Sch file.
Step2: Copy group command
Step3: use the paste command in your schematic!

Alternatively you can use exp-lbr.ulp to export libraries. I have attached the A10 library here. http://wp.me/p2D6cb-Tz
« Last Edit: January 11, 2016, 08:14:06 PM by dmsherazi »

MBR

  • Sr. Member
  • ****
  • Posts: 256
  • Karma: +19/-0
Re: a10 eagle lib
« Reply #2 on: January 24, 2016, 09:14:21 PM »
You can even export a library of the used parts (at least in EAGLE 6+, AFAIK) out of schematics/board, by File/Export/Libraries. Nothe that in freeware version of EAGLE, there may be problems with layers 2-15, because the freeware version supports only the top and bottom layers (1 and 16].