July 07, 2022, 07:58:49 am

PIC32 OTG connectors

Started by .Costin, July 29, 2014, 03:27:16 pm

Previous topic - Next topic

.Costin

Hi, please tell me the component code and the manufacturer for CON3.I need the second i2c, so I must solder it...If you can also  specify a distributor where I can find it, I will appreciate that a lot..By the way, why can't be finded all Olimex products range on Mouser ? Thanks...

Lurch

July 29, 2014, 05:39:06 pm #1 Last Edit: July 29, 2014, 05:44:18 pm by Lurch
They're just 20pin 1.27mm smt headers like
  Mouser: http://www.mouser.de/ProductDetail/FCI/20021121-00020C4LF/?qs=sGAEpiMZZMtEmA642%2fnmDMh%2fBD0eZIs3
  Olimex: https://www.olimex.com/Products/Components/Connectors/MALE-PAV16X-2x10/

.Costin

Thank you very much..It's allways a better ideea to ask directly at "source"...:)

.Costin

Hmmm...Just soldered it, but it seems that electrolytic cap near the connector don't let a plug to fit properly..Any ideeas or a code for a proper plug to fit there ?