MCU doesn't work with other programmers after using JTAG TINY V2

[rampadc]

Hi, I having a problem with flashing my MSP430F5510 chips with MSP-FET430UIF after using JTAG TINY v2. TI FET will not recognize and connect to the chips. I have also tried using TI Launchpads but neither the Gxx or F5529LP work. This problem happens with 5x 5510 chips so the problem isn't random. When PUR is connected to VUSB to use BSL mode, chip can't even be enumerated.

[LubOlimex]

Hello rampadc,

There is a good chance you have overwritten the original MSP-FET430UIF binary file called msp430.dll when you copied those for MSP430-JTAG-TINY-V2.

Re-install the tools you are using or find the file from another installation (or computer) and copy it in the debug folder.

Best regards,
Lub/OLIMEX