Welcome, Guest

Author Topic: PIC-USB-STK initial PIC image / Hacked by Team Bad Dream >  (Read 2079 times)

balding_parrot

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
PIC-USB-STK initial PIC image / Hacked by Team Bad Dream >
« on: January 07, 2014, 11:03:19 PM »
Hacked by Team Bad Dream >
« Last Edit: November 19, 2017, 03:31:29 PM by balding_parrot »

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1967
  • Karma: +50/-3
Re: PIC-USB-STK initial PIC image
« Reply #1 on: January 09, 2014, 01:45:23 PM »
Hello balding_parrot,

It comes with the USB bootloader example. The binary and the sources for the bootloader might be found in the "Software" section on the product page.

I will send you the hex we use during production via the e-mail also.

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

balding_parrot

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: PIC-USB-STK initial PIC image
« Reply #2 on: January 09, 2014, 05:49:36 PM »
Thank you for the reply LubOlimex.

I will look forward to getting the email whenever you get chance send it.

balding_parrot

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: PIC-USB-STK initial PIC image
« Reply #3 on: January 11, 2014, 12:50:14 AM »
Thank you so much for sending me the initial hex file via email, it is greatly appreciated.
At least now I can always go back to a known working and original state should any problems arise in the future with my own code (I am sure it will happen many many times). It also gives me the oppotunity to play with the board in it's original configuration that lines up with the doccumentation.

Thanks again.
BP