Olimex Support Forum

Microcontrollers => PIC => Topic started by: balding_parrot on January 07, 2014, 11:03:19 pm

Title: PIC-USB-STK initial PIC image / Hacked by Team Bad Dream >
Post by: balding_parrot on January 07, 2014, 11:03:19 pm
Hacked by Team Bad Dream >
Title: Re: PIC-USB-STK initial PIC image
Post by: LubOlimex on January 09, 2014, 01:45:23 pm
Hello balding_parrot,

It comes with the USB bootloader example. The binary and the sources for the bootloader might be found in the "Software" section on the product page.

I will send you the hex we use during production via the e-mail also.

Best regards,
Lub/OLIMEX
Title: Re: PIC-USB-STK initial PIC image
Post by: balding_parrot on January 09, 2014, 05:49:36 pm
Thank you for the reply LubOlimex.

I will look forward to getting the email whenever you get chance send it.
Title: Re: PIC-USB-STK initial PIC image
Post by: balding_parrot on January 11, 2014, 12:50:14 am
Thank you so much for sending me the initial hex file via email, it is greatly appreciated.
At least now I can always go back to a known working and original state should any problems arise in the future with my own code (I am sure it will happen many many times). It also gives me the oppotunity to play with the board in it's original configuration that lines up with the doccumentation.

Thanks again.
BP