Little errors on O'Micro manual (revision H)

Started by flavigny, October 18, 2012, 11:00:45 pm

Previous topic - Next topic

flavigny

Hello,
yet some words inherited from O'Maxi:

in section 6.4:
"OLinuXino GPIO Connector
#" is the consecutive number of pins with BAT being Pin#1 and GND#40.

in section 6.5:
The USB hosts and the Ethernet are controller by the iMX233 controller.

there is only One usb and no ethernet.

Regards
PO.

LubOlimex

Thanks flavigny,

These parts are now fixed and the changes will be visible when the next revision of the manual is released.

Regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex