Print Page - Little errors on O'Micro manual (revision H)

Title: Little errors on O'Micro manual (revision H)
Post by: flavigny on October 18, 2012, 11:00:45 PM

Hello,
yet some words inherited from O'Maxi:

in section 6.4:
"OLinuXino GPIO Connector
#" is the consecutive number of pins with BAT being Pin#1 and GND#40.

in section 6.5:
The USB hosts and the Ethernet are controller by the iMX233 controller.

there is only One usb and no ethernet.

Regards
PO.

Title: Re: Little errors on O'Micro manual (revision H)
Post by: LubOlimex on October 19, 2012, 08:43:38 AM

Thanks flavigny,

These parts are now fixed and the changes will be visible when the next revision of the manual is released.

Regards,
Lub/OLIMEX

Olimex Support Forum

OLinuXino Android / Linux boards and System On Modules => iMX233 => Topic started by: flavigny on October 18, 2012, 11:00:45 PM