December 08, 2023, 10:21:51 PM

Olimexino 328 programming with ISP ?

Started by kermit, June 18, 2013, 11:32:42 PM

Previous topic - Next topic


I want to use the Olimexino328 board without using the Arduino Libraries.
So I would like to program it only with ISP via AVR Studio 4 and STK500 or AVR-ISP-MK2 from Olimex.
Is this possible ?


Hello kermit,

Yes. AVR Studio 4 and both Olimex STK500 and AVR-ISP-MK2 programmers work together. However note that AVR-ISP-MK2 has only 10-pin ICSP connector (and OLIMEXINO-328 has 6 ICSP pin holes) which would require to make and adapter cable 10-pin to 6-pin. Both designs are capable of programming OLIMEXINO-328.

You would also need to provide jumper cables OR mount own connector (2x3) on the ICSP pin holes, so the physical connection is possible.

Best regards,
Technical support and documentation manager at Olimex


Thank you for your information, I supposed it could work, but was not sure.

Best regard,