Welcome, Guest

Author Topic: Recommended development system for SAM3-H256 board  (Read 3989 times)

Canuk27

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Recommended development system for SAM3-H256 board
« on: May 14, 2013, 01:21:08 AM »
Hi,

I'm wondering if you have a recomendation for a development system for the SAM3-H256 board on Windows. I bought an ATMEL SAM-ICE and installed Atmel's studio IDE with the GNU compiler but beyond the simple "turn on an LED" demo I can't get anything going.

Suggestions?

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1713
  • Karma: +43/-2
Re: Recommended development system for SAM3-H256 board
« Reply #1 on: May 14, 2013, 09:23:10 AM »
Hey Canuk27,

We used IAR Embedded Workbench with SAM3-H256.

A good place to look for software is the ATMEL's web-page for SAM3S (http://www.atmel.com/products/microcontrollers/arm/sam3s.aspx) and the list of software packs for different IDEs (http://www.atmel.com/tools/SAM3SSOFTWAREPACKAGE.aspx)

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

paulm

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Re: Recommended development system for SAM3-H256 board
« Reply #2 on: November 06, 2014, 03:54:21 AM »
Hi I am a newbie to OLIMEX, so please excuse.
I have purchased a SAM3-H256 and am trying to compile simple apps using Atmel Studio 6 (version 6.2.1502 SP1)

The studio has ability to configure for boards like Atmel's dev boards SAM3S-EK and SAM3S-EK2.
The SAM3S-EK is similar but not the same as the SAM3-H256 and I get compilation problems when trying to use this board as a starting point.

Is there some way to add a SAM3-H256 board to the atmel studio 6 build?
I think this involves creating something equivalent to sam3s_ek.h that exists in the studio (plus possibly other files)
I suspect someone (many people!) have already done this to use the H256 easily with the Atmel Studio.
I would appreciate advice or code that would help me to proceed because I am currently stuck on this.

With thanks,
Paul