A10S Ethernet doesn't seem to work

Started by dave-at-axon, December 24, 2013, 04:58:12 AM

Previous topic - Next topic

dave-at-axon

I have installed Debian to try it out and I can't seem to get Ethernet to work. The LED's come on and flash but the device does not get an IP as it does not show up on the routers connected devices page and doing IFCONFIG from the device shows nothing.

Do I have to do anything to get Ethernet to work?


Lurch

You should check /etc/network/interfaces to make sure that the 'auto eth0' is not commented out.  The default on some software versions was wlan.

dave-at-axon