After start I cannot Initialize the ethernet, I got following output:
E (2060) emac: Timed out waiting for PHY register 0x2 to have value 0x0007(mask 0xffff). Current value 0x0000
E (3061) emac: Timed out waiting for PHY register 0x3 to have value 0xc0f0(mask 0xfff0). Current value 0x0000
E (3061) emac: Initialise PHY device Timeout
[E][ETH.cpp:101] begin(): esp_eth_enable error: -1
The Identical code using ESP-Gateway rev.G works fine.
Anyone can help?
Regards
!EDIT -> Found the solution here on the forum, you have to add an additional define, #define ETH_PHY_POWER 12 before including <eth.h>