I bought some time ago from Olimex the mentioned board, but didn't have time to play with it too much.
Now I installed sam-ba 2.12 and I'm trying to connect but fails all the time.
I have no other version of sam-ba installed and the board is detected as "AT91 USB to Serial Converter".
I'm running it on Windows XP 32 bit.
I have also a J-link and I have no problems in connecting to the board.
But on USB no chance.
I followed the steps in the manual: remove AT jumper, power on the board, plug USB device, put back AT jumper, try connecting => Communication error.
I tried with both Sam-ba application but also with the script (sam9_l9261_demo_linux.bat -> sam9_l9261_demo_linux.tcl), both are failing.
Thanks for any help,