Lime - es2gears libEGL warning: DRI2: failed to open lima

Started by kruno, February 19, 2014, 07:00:38 pm

Previous topic - Next topic


using the latest sd card image from:

root@a10Lime:~# es2gears
libEGL warning: DRI2: failed to open lima (search paths /usr/lib/arm-linux-gnueabihf/dri:${ORIGIN}/dri:/usr/lib/dri)
vertex shader info:
fragment shader info:
78 frames in 5.0 seconds = 15.501 FPS

Any help is appreciated.


Did you find out how to solve this problem? I'm stuck at the same point...  :-\


I got it running with the sunxi-mali drivers.

git clone
cd sunxi-mali
git submodule init
git submodule update
sudo make install

# move the lima drivers out of the search path:
sudo mkdir /usr/lib/arm-linux-gnueabihf/bak
sudo mv /usr/lib/arm-linux-gnueabihf/libGLES* /usr/lib/arm-linux-gnueabihf/bak
sudo mv /usr/lib/arm-linux-gnueabihf/libEGL* /usr/lib/arm-linux-gnueabihf/bak

gl2gears then runs with 50 FPS
And after I resized the window suddenly with 60, also sometimes the cpu usage is at ~5% then it jumps to 50%.

after a reboot it's now running with ~150 FPS!?


I'm having the same problem on an A20 board.  Using the sunxi-mali drivers didn't help.  Is there a particular revision or branch you used?  Any other clues?