Difference between revisions of "SAM9-L9260"

m (Preparing rootfs)
m (Preparing rootfs)
Line 35: Line 35:
 
     sudo apt-get update
 
     sudo apt-get update
 
     sudo apt install -y debootstrap qemu-arm-static mtd-utils
 
     sudo apt install -y debootstrap qemu-arm-static mtd-utils
 +
 +
Create empty directory, which will contain the new rootfs:
 +
 +
    mkdir armel-lenny
 +
 +
Run debootstrap and wait to finish:
 +
 +
    sudo qemu-debootstrap --arch armel lenny ./armel-lenny
  
 
== Projects ==
 
== Projects ==

Revision as of 04:35, 15 March 2019

Documents

Under construction

Hardware

Under construction

Software

Building at91bootstrap

Get the sources with:

   git clone -b olimex https://github.com/OLIMEX/at91bootstrap.git

Go to the cloned folder and select SAM9-L9260 configuration:

   cd at91bootstrap
   make sam9_l9260_uboot_defconfig

Compile the sources with:

   make CROSS_COMPILE=arm-linux-gnueabi-

The bootstrap file can be found at:

   binaries/sam9_l9260-dataflashcardboot--3.8.11.bin

Preparing rootfs

In this tutorial Debian Lenny will be used. The build process may vary, depending on host PC system. The following instructions are tested on Ubuntu 18.04.

Install required packages:

   sudo apt-get update
   sudo apt install -y debootstrap qemu-arm-static mtd-utils

Create empty directory, which will contain the new rootfs:

   mkdir armel-lenny

Run debootstrap and wait to finish:

   sudo qemu-debootstrap --arch armel lenny ./armel-lenny

Projects

Under construction

FAQ

Under construction