Difference between revisions of "PWRJACK"

(Olimex power jack)
(Olimex power jack)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
==Olimex power jack==
 
==Olimex power jack==
  
 +
Our boards usually use a DC barrel jack with a 2.0mm thick inner pin. The outer hole diameter is 6.3mm.
  
 
The standard power supply jack used in most of the OLIMEX boards has positive voltage in the inner pin:
 
The standard power supply jack used in most of the OLIMEX boards has positive voltage in the inner pin:
  
  
[[File:PWRJACK.jpg]]
+
[[File:PWRJACK.jpg|600px]]
  
The inner pin of the female jack has diameter of 2.5mm. The exact part name of the female jack that we use is YDJ-1136.
 
  
 
----
 
----
  
The corresponding power supply plug (or male jack) that fits the YDJ-1136 is AP353B. It has external diameter 5.5 mm and inner diameter 2.5 mm as shown in the picture below:
+
The corresponding power supply plug (or male jack) fits the above DC barrel has 2.1mm inner diameter and 5.5mm outer diameter. The length of the male plug should be between 10mm and 14mm.
  
 
[[File:PWRPLUG.jpg]]
 
[[File:PWRPLUG.jpg]]

Latest revision as of 04:13, 15 September 2017

Olimex power jack

Our boards usually use a DC barrel jack with a 2.0mm thick inner pin. The outer hole diameter is 6.3mm.

The standard power supply jack used in most of the OLIMEX boards has positive voltage in the inner pin:


PWRJACK.jpg



The corresponding power supply plug (or male jack) fits the above DC barrel has 2.1mm inner diameter and 5.5mm outer diameter. The length of the male plug should be between 10mm and 14mm.

PWRPLUG.jpg