Difference between revisions of "MOD-RS485-ISO"

(Archive firmware)
Line 9: Line 9:
 
Under construction
 
Under construction
  
== Archive firmware ==
+
== Older Firmware releases ==
 
Latest firmware is available at the main page of the device. In the wiki one can only find older firmware, that still might be helpful. The projects listed below are no longer officially supported. The best practice is to use the EXACT same compiler as mentioned and in most cases the exact same IDE version as mentioned.
 
Latest firmware is available at the main page of the device. In the wiki one can only find older firmware, that still might be helpful. The projects listed below are no longer officially supported. The best practice is to use the EXACT same compiler as mentioned and in most cases the exact same IDE version as mentioned.
  
 
Older firmware and examples based on older firmware, released by Olimex for MOD-RS485-ISO:
 
Older firmware and examples based on older firmware, released by Olimex for MOD-RS485-ISO:
  
1)MOD-RS485 v1 firmware - binary, source, and how-to - [https://www.olimex.com/Products/Modules/Interface/MOD-RS485-ISO/resources/MOD-RS485_FIRMWARE.zip click to download]
+
1) MOD-RS485-ISO v2 firmware - binary, source, and how-to - [https://www.olimex.com/Products/Modules/Interface/MOD-RS485-ISO/resources/MOD-RS485_FIRMWARE_V2.zip]
  
2)MOD-RS485 v1 firmware + OLIMEXINO-328 - C source and HEX for I2C control - [https://www.olimex.com/Products/Duino/AVR/OLIMEXINO-328/resources/OLIMEXINO-328-MOD-RS485-ISO.zip click to download]
+
2)MOD-RS485-ISO v1 firmware - binary, source, and how-to - [https://www.olimex.com/Products/Modules/Interface/MOD-RS485-ISO/resources/MOD-RS485_FIRMWARE.zip click to download]
  
3)MOD-RS485 v1 firmware + PIC-P26J50 demo code - C source and HEX for I2C control - [https://www.olimex.com/Products/Modules/Interface/MOD-RS485-ISO/resources/Demo_MOD-RS485_PIC26J50s.zip click to download]
+
3)MOD-RS485-ISO v1 firmware + OLIMEXINO-328 - C source and HEX for I2C control - [https://www.olimex.com/Products/Duino/AVR/OLIMEXINO-328/resources/OLIMEXINO-328-MOD-RS485-ISO.zip click to download]
 +
 
 +
4)MOD-RS485-ISO v1 firmware + PIC-P26J50 demo code - C source and HEX for I2C control - [https://www.olimex.com/Products/Modules/Interface/MOD-RS485-ISO/resources/Demo_MOD-RS485_PIC26J50s.zip click to download]
  
 
== Projects ==
 
== Projects ==

Revision as of 01:56, 26 June 2015

Documents

Under construction

Hardware

Under construction

Software

Under construction

Older Firmware releases

Latest firmware is available at the main page of the device. In the wiki one can only find older firmware, that still might be helpful. The projects listed below are no longer officially supported. The best practice is to use the EXACT same compiler as mentioned and in most cases the exact same IDE version as mentioned.

Older firmware and examples based on older firmware, released by Olimex for MOD-RS485-ISO:

1) MOD-RS485-ISO v2 firmware - binary, source, and how-to - [1]

2)MOD-RS485-ISO v1 firmware - binary, source, and how-to - click to download

3)MOD-RS485-ISO v1 firmware + OLIMEXINO-328 - C source and HEX for I2C control - click to download

4)MOD-RS485-ISO v1 firmware + PIC-P26J50 demo code - C source and HEX for I2C control - click to download

Projects

Under construction

FAQ

Under construction