Difference between revisions of "ArmbianHowTo"

(Building image)
(How to use image)
Line 3: Line 3:
 
Root password is 1234.
 
Root password is 1234.
  
The great Armbian documentation is available here (look here for root [https://docs.armbian.com https://docs.armbian.com].
+
The great Armbian documentation is available here: [https://docs.armbian.com https://docs.armbian.com].
  
 
==Building image==
 
==Building image==

Revision as of 02:07, 13 February 2018

How to use image

Root password is 1234.

The great Armbian documentation is available here: https://docs.armbian.com.

Building image

Make sure to take a look at the official Armbian documentation here: https://docs.armbian.com.

  • Clone repository
 # git clone https://github.com/armbian/build.git
 Cloning into 'build'...
 remote: Counting objects: 32391, done.
 remote: Compressing objects: 100% (69/69), done.
 remote: Total 32391 (delta 60), reused 75 (delta 44), pack-reused 32278
 Receiving objects: 100% (32391/32391), 258.91 MiB | 959.00 KiB/s, done.
 Resolving deltas: 100% (21325/21325), done.
 Checking connectivity... done.
 Checking out files: 100% (2205/2205), done.

Soon (probably) there will be olimex fork with some customizations.

  • Run builder
 # cd build
 # ./compile

Building requires root access. System preparation can take long, depending on system, etc. After that you should see something like that:

Armbian-1.png

Select Full OS Image for flashing. This will create output image for direct flashing on SD-card.

Armbian-2.png

Select Do not change the kernel configuration. All needed configuration should be selected automatically. If you want some kernel modifications, select the other option.

Armbian-3.png

Go to <Show CSC/WIP/ESO>. Currently A20-SOM204 is not officially supported by Armbian team. Instead the board is supported by Olimex team, which is under CSC section. So select that menu and confirm the action.

Armbian-4.png Armbian-5.png

Select olimex-som204-a20.

Armbian-6.png

Select desired distribution. We recommend jessie for server build, and xenial for image with desktop environment.

Armbian-7.png

Select if you want server or desktop.

After build the images and other packages will be in the output folder:

 # tree output
 output/
 ├── config
 ├── debs
 │   ├── armbian-config_5.41_all.deb
 │   ├── armbian-firmware_5.41_all.deb
 │   ├── armbian-firmware-full_5.41_all.deb
 │   ├── armbian-tools-jessie_5.41_armhf.deb
 │   ├── armbian-tools-xenial_5.41_armhf.deb
 │   ├── extra
 │   ├── jessie
 │   ├── linux-u-boot-dev-olimex-som204-a20_5.41_armhf.deb
 │   └── xenial
 │       └── linux-xenial-root-dev-olimex-som204-a20_5.41_armhf.deb
 ├── debug
 │   ├── logs-09_02_2018-13_53_10.tgz
 │   ├── logs-09_02_2018-15_08_20.tgz
 │   ├── logs-12_02_2018-10_58_50.tgz
 │   ├── logs-12_02_2018-11_01_35.tgz
 │   ├── logs-12_02_2018-11_11_51.tgz
 │   ├── logs-.tgz
 │   ├── output.log
 │   ├── patching.log
 │   └── timestamp
 ├── images
 │   ├── Armbian_5.41_Olimex-som204-a20_Debian_jessie_dev_4.15.0.img
 │   └── Armbian_5.41_Olimex-som204-a20_Ubuntu_xenial_dev_4.15.0_desktop.img
 └── patch


  • Flashing image

Put sdcard in the host PC. New device should appear, e.g. /dev/sdc. Flash the image using the following command:

 # dd if=Armbian_5.41_Olimex-som204-a20_Debian_jessie_dev_4.15.0.img of=/dev/sdx bs=10M

Replace /dev/sdx with your device. You must use /dev/sdx, not /dev/sdx1!