Difference between revisions of "A20-OLinuXino-LIME"

(Add Voice to your OLinuXino project)
(I don't have neither serial cable, nor HDMI monitor. I also can't access the local Ethernet network. Can I somehow access the board anyway?)
Line 322: Line 322:
  
 
You can connect to the board using a mini USB cable and an SSH client (for example “puTTY”) at address 192.168.2.1.
 
You can connect to the board using a mini USB cable and an SSH client (for example “puTTY”) at address 192.168.2.1.
 +
 +
===How to edit board configurations and definitions in the official Debian Linux? ===
 +
 +
Do you want a custom video resolution output? Do you need a different port definition? Do you need to change the hardware defitions of the board?
 +
 +
You would need to edit the board's script.bin/script.fex file. How to do it is described in another separate article: [[How_to_edit_board_configurations_and_definitions_in_the_official_Debian_Linux]].
  
 
===How to add STK1160 video capture driver support in Kernel 3.4===
 
===How to add STK1160 video capture driver support in Kernel 3.4===

Revision as of 04:15, 10 February 2015

A20-OLinuXino-LIME.jpeg

A20-OLinuXino-LIME looks identical to A10-OLinuXino-LIME, except for the more powerful A20 processor. The A10 and the A20 processors are pin-to-pin compatible. Because of the processor, software-wise the board is closer to A20-OLinuXino-MICRO than to the A10-OLinuXino-LIME. This resemblance to other designs definitely might speed the development on the board - a lot of software written for A20-OLinuXino-MICRO might work out-of-the-box with A20-OLinuXino-LIME. Additionally, pinout tables, GPIO maps, etc released for A10-OLinuXino-LIME would apply to A20-OLinuXino-LIME

A20-OLinuXino-LIME features:

  • A20 Cortex-A7 dual-core ARM Cortex-A7 CPU and dual-core Mali 400 GPU
  • 512MB DDR3 RAM memory
  • optional 4GB NAND FLASH memory
  • SATA connector with 5V SATA power jack
  • HDMI FullHD 1080p
  • 2x USB Low-Full-High-Speed hosts with power control and current limiter
  • USB-OTG with power control and current limiter
  • 100MBit native Ethernet
  • LiPo Battery connector with battery-charging capabilities
  • LCD connector compatible with with 4.3", 7.0", 10.1" LCD modules from Olimex
  • 160 GPIOs on three GPIO connectors
  • MicroSD card connector
  • DEBUG-UART connector for console debug with USB-SERIAL-CABLE-F
  • status LED
  • Battery charge status LED
  • Power LED
  • 2KB EEPROM for MAC address storage and more
  • 2 BUTTONS with ANDROID functionality + RESET button
  • 2 mount holes
  • 5V input power supply, noise immune design
  • PCB dimensions: 84 x 60 mm


Official images from OLIMEX

Below you would find links to the official Debian and Android images. The images in this chapter were compiled by Olimex. They are recommended for beginners and first time users since they include full hardware support. If you are experienced Linux professional you might find bare-bone images and much more in the next chapter "Notable unofficial images".

The downloaded file xxxx.7z is an archive of xxx.img file. In order to write the image on SD card you have to unzip the xxx.7z file.

  • For Linux: use p7zip package. If you don't have 7zip installed first install it

   #apt-get install p7zip

Copy a20_Lime_debian_second_release.7z file in your directory and unzip the archive with

   #7za e a20_Lime_debian_second_release.7z

where a20_Lime_debian_second_release.7z The output should be a new 4GB file with extension img Put 4GB SD card in your card reader and type

   # ls /dev/sd

Then press two times <TAB> you will see a list of your sd devices like sda sdb sdc note that some of these devices may be your hard disk so make sure you know which one is your sd card before you proceed as you can damage your HDD if you choose the wrong sd-device. You can do this by unplugging your sd card reader and identify which "sd" devices remove from the list. Once you know which device is your sdcard like sda use this text instead of the sdX name in the references below:

   #dd if=a20_Lim2_debian_second_release.img of=/dev/sdX


Linux

Download locations of the official Debian Linux images and might be found below!

Newest official release (recommended):

Torrent of Debian release 3: A20-OLinuXino-Lime Debian with kernel 3.4.90+ release 3

Build instructions and required files for the latest Debian images: instructions and files at the GitHub page

Older official releases (not recommended):

Torrent of Debian release 2: A20-OLinuXino-Lime Debian with kernel 3.4.90+ release 2

Direct download of Debian release 1: A20-OLinuXino-LIME Debian image with Kernel 3.4.90+ release 1

Note: the A20-Debian card which we have in our web store contains the same image on 4GB Class10 fast micro SDcard, if you want to use this image please use card of Class10 speed or the performance of Linux will be very slow.

Note: in the previous Debian releases the Ethernet was auto-detected and initialized during boot BUT this was causing big delays in the start-up of the board if you didn't want to use Ethernet or if there wasn't Ethernet cable connected.

You can enable it by following these two steps:

1. To check under what name the LAN is associated write "ifconfig –a"

2. If, for example, it is under eth0 name, then write: "dhclient eth0"

This should enable the Ethernet and then SSH would also be available.

Android

Torrents of official Android releases are below. Please read description of the image carefully.

Torrent of Android 4.2.2 release 1 for NAND memory (with HDMI and 800x480 support): A20-OLinuXino-Lime Android for NAND with HDMI and 7 inch display support

Torrent of Android 4.2.2 release 1 for NAND memory (with HDMI and 1024x600 support): A20-OLinuXino-Lime Android for NAND with HDMI and 10 inch display support

Torrent of Android 4.2.2 release 1 for microSD card (with HDMI and 800x480 support): A20-OLinuXino-Lime Android for microSD card with HDMI and 7 inch display support

Torrent of Android 4.2.2 release 1 for microSD card (with HDMI and 1024x600 support): A20-OLinuXino-Lime Android for microSD card with HDMI and 10 inch display support

Direct download locations of official Android releases are below. In case the daily limit of the download locations had been reached, please use the torrents above. Please read description of the image carefully.

Direct download NAND flash image for Android 4.2.2 with 7″ LCD 800×600 pixels

Direct download NAND flash image for Android 4.2.2 with 10″ LCD 1024×600 pixels

Direct download 4GB SD-card image for Android 4.2.2 with 7″ LCD 800×600 pixels

Notable unofficial images

Below you would find locations to images released by the community. These are not officially supported by Olimex, however, some of these releases are pretty good and worth a try:

A number of very good and optimized A20-OLinuXino-LIME Debian images by Igor Pečovnik. There are also instructions for NAND installation of Debian: link to his web-site

Documents

A20-OLinuXino-LIME user's manual

User's manual for A20-OLinuXino-LIME and A20-OLinuXino-LIME-4GB

A20 Brief

A20 brief

A20 Datasheet

A20 Datasheet

A20 User Manual

A20 user's manual

Hardware

LIME shields

Eagle and KiCAD shield templates for LIME

GPIO description

A10-OLinuXino-LIME GPIO description

A template that might be used to create custom shields or own adapters might be downloaded for Eagle or KiCad at the GitHub here: shield template

Power supply and consumption

A20-OLinuXino-LIME requires 5V regulated power supply external source. regulated means that the power supply adapter should provide exactly 5V no matter loaded or unloaded (some cheap wallwart adapters are not regulated and under no load their power supply may be higher than 5V although marked as 5V power supply, please measure with voltmeter if your power supply provide 5V as if you connect more than 5V to LIME it will be damaged!!!)

The power jack is standard OLIMEX Power jack.

A20-OLinuXino-LIME can be powered from three sources:

  • +5VDC voltage applied PWR jack
  • +3.7V from LiPo re-chargable battery connected to LiPo board connector
  • +5V applied to USB-OTG connector


Power consumption is as follows:

  • LiPo 3.7V power battery: 1.2W
  • +5VDC input power: 1.3W


Comparison table of power consumption might be found at the following link.

LiPo battery allow backup power supply when main power is interrupted. A20-OLinuXino-LIME have power managment IC which charge the battery when main power is present, when power is interrupted the LiPo battery automatically provide backup power supply. Step-up converter prvide 5V for the USB peripherials too. For LiPo batteries we recommend these:


Board dimensions

A20-OLinuXino-LIME basic dimensions in mils: 3305.5 x 2347.0

Some additional measures might be seen in the image here: link

CAD files

A20-OLinuXino-LIME is Open Source Hardware, CAD files are available at GitHub


The CAD product used to design OLinuXino is Eagle and you can download evaluation free version from their web.

Board Layout

A20-OLinuXino-LIME-FRONT.png


A10-OLinuXino-LIME-BACK.jpg

Software

Linux Commands

Linux-Commands Brief Linux Command reference

Python

pyA20Lime is Python library for the GPIOs, I2C and SPI use of suitable A20-OLinuXino-LIME's pins. It makes the access to GPIO, I2C and SPI considerably easier.

Full information might be found at this web address

GPIO under Linux

GPIOs are located in /sys/class/gpio directory. Note that first you have to export GPIOs. For example:

add gpioPH2

   root@A10:~# echo 20 > /sys/class/gpio/export

make PH2 output

   root@A10:~# echo out > //sys/class/gpio/gpio20_ph2/direction

turn on onboard LED(connected to PH2)

   root@A10:~# echo 1 > /sys/class/gpio/gpio20_ph2/value

turn off onboard LED(connected to PH2)

   root@A10:~# echo 0 > /sys/class/gpio/gpio20_ph2/value

Full list with supported GPIOs is:

   gpio21_ph7   gpio33_ph20  gpio45_pb12  gpio57_pi2   gpio69_pi14
   gpio10_pg11  gpio22_ph9   gpio34_ph21  gpio46_pb13  gpio58_pi3   gpio6_pg5
   gpio11_pc3   gpio23_ph10  gpio35_ph22  gpio47_pb14  gpio59_pi4   gpio70_pi15
   gpio12_pc18  gpio24_ph11  gpio36_ph23  gpio48_pb15  gpio5_pg4    gpio71_pi16
   gpio13_pc19  gpio25_ph12  gpio37_pb3   gpio49_pb16  gpio60_pi5   gpio72_pi17
   gpio14_pc20  gpio26_ph13  gpio38_pb4   gpio4_pg3    gpio61_pi6   gpio73_pi18
   gpio15_pc21  gpio27_ph14  gpio39_pb5   gpio50_pb17  gpio62_pi7   gpio74_pi19
   gpio16_pc22  gpio28_ph15  gpio3_pg2    gpio51_ph24  gpio63_pi8   gpio75_pi20
   gpio17_pc23  gpio29_ph16  gpio40_pb6   gpio52_ph25  gpio64_pi9   gpio7_pg6
   gpio18_pc24  gpio2_pg1    gpio41_pb7   gpio53_ph26  gpio65_pi10  gpio8_pg7
   gpio19_ph0   gpio30_ph17  gpio42_pb8   gpio54_ph27  gpio66_pi11  gpio9_pg8
   gpio1_pg0    gpio31_ph18  gpio43_pb10  gpio55_pi0   gpio67_pi12  gpiochip1
   gpio20_ph2   gpio32_ph19  gpio44_pb11  gpio56_pi1   gpio68_pi13 

Add Voice to your OLinuXino project

Installation of Festival on OLinuXino


How To?

How to generate boot-able SD-card Debian Linux image for A20-OLinuXino-LIME?

Build instructions and required files for the latest Debian images: instructions and files at the GitHub page

Note that Linux-Sunxi Kernel is a work-in-progress, this means you can try the current stage/sunxi-x.x branch but if something is broken and doesn't work just revert to the git tags we give in the blog and they would work for sure.

Sunxi u-boot loader The linux-sunxi git page contains a lot of sources for all Olimex Allwinner boards.

How to connect a display and adjust the output resolution?


There is a separate article on the subject: How_to_connect_display_to_a_Lime_board

Is it possible to boot Debian from NAND? Do you provide such image?

It is possible bu we don't provide such image. There are people who were successful in booting Debian from the NAND, however. Make sure to check on the forum. Make sure to check the number of very good and optimized A20-OLinuXino Debian images by Igor Pečovnik. There are also instructions for NAND installation of Debian: link to his web-site

How to detect and enable the Ethernet controller (if it is disabled by default)?

Note: in the previous Debian releases the Ethernet was auto-detected and initialized during boot BUT this was causing big delays in the start-up of the board if you didn't want to use Ethernet or if there wasn't Ethernet cable connected.

You can enable it by following these two steps:

1. To check under what name the LAN is associated write "ifconfig –a"

2. If, for example, it is under eth0 name, then write: "dhclient eth0"

This should enable the Ethernet and then SSH would also be available.

How to download new Android image to the NAND memory of my A20 board?

To repair the image on the NAND re-upload it following these steps:

  • 2. Go to firmware tab of the program and point to a valid Android image (the latest official one may also be downloaded above).
  • 3. Disconnect the power supply and USB cable from the A20 board.
  • 4. Press and hold RECOVERY button, apply power supply 5V, release RECOVERY button.
  • 5. Connect USB cable to the mini USB connector.
  • 6. You will be asked for drivers for the bootloader. Navigate to the folder where you extracted the PhoenixSuit and install the drivers from the respective executables (or manually point the installer to the drivers folder in the PhoenixSuit installation path).
  • 7. PhoenixSuit will detect the board and would ask for the method of writing the image. Choose method of writing the image and confirm your wish to write the image.
  • 8. Wait till upgrade succeeds


Note that it is not recommended to have your mini USB connected to an external USB hub. This might cause delays and might distort the signal levels. Always test with the USB connected straight to the USB ports of your computer.

How do I write the official Android image to a micro SD card for my A20 board?

There might be different Android images available for an SD card. They can be downloaded above A20-OLinuXino-LIME#Android. Note that Android display configuration settings are edited in the script.bin file (it has to be converter to fex and edited according to the fex guide at linux sunxi's article; then converted back to script.bin and written in the image). To write the images on the SD card you will need PhoenixSuit and to follow these steps:

• Install and run PhoenixSuit (can be found here: download from google drive)

• Go to the firmware tab of the program and point to a valid Android image (note that the imagesare compressed and you have to extract them to .img files to be able write them with PhoenixSuit)

• Disconnect the power supply and USB cable from the A20 board. Put an SD card in micro SD holder. We recommend 4GB class 10 card.

• Press and hold RECOVERY button, apply power supply (6-16)V, release RECOVERY button.

• Connect USB cable to the mini USB connector.

• You will be asked for drivers for the boot-loader. Navigate to the folder where you extracted the PhoenixSuit and install the drivers from the respective executable (or manually point the installer to the drivers folder in the PhoenixSuit installation path).

• PhoenixSuit will detect the board and would ask for the method of writing the image. Choose method of writing the image and confirm your wish to write the image.

• Wait till upgrade succeeds

Note that it is not recommended to have your mini USB connected to an external USB hub. This might cause delays and might distort the signal levels. Always test with the USB connected straight to the USB ports of your computer.

Important: When Android runs for very first time it takes several minutes to initialize all files and buffers please do not cut the power supply during this process! Also when fresh image is installed fast boot may be disabled, which means that when you apply power supply after few seconds Android will go in sleep mode and you have to press POWER button to start it, you can change to fast boot when you power off there is dialog box asking you if you want next boot to be fast boot, you have to check this box before you power off. Also note that you must do touch screen calibration when you run Android for very first time which might require a mouse.

I don't have neither serial cable, nor HDMI monitor. I also can't access the local Ethernet network. Can I somehow access the board anyway?

The latest official Debian Linux image allows the use the USB_OTG connector for SSH connection without the need of a LAN cable or a serial cable. You can use a mini USB cable connected between your host PC and the on-board mini USB connector. For connection convenience there is a DHCP server running specifically for USB0 interface. The DHCP server should give IP address to the new USB0 interface of your host PC so you can make SSH connection from your PC to the default board IP address of the USB0 interface – 192.168.2.1.

You can connect to the board using a mini USB cable and an SSH client (for example “puTTY”) at address 192.168.2.1.

How to edit board configurations and definitions in the official Debian Linux?

Do you want a custom video resolution output? Do you need a different port definition? Do you need to change the hardware defitions of the board?

You would need to edit the board's script.bin/script.fex file. How to do it is described in another separate article: How_to_edit_board_configurations_and_definitions_in_the_official_Debian_Linux.

How to add STK1160 video capture driver support in Kernel 3.4

STK1160 driver backport by Dimitar Tomov

Main_Page