≡
[22:35:03] <tocix> Hello.
[22:36:09] <tocix> is a 5V 3A adapter good enough for imx233-olinuxino-micro?
[22:37:05] <tocix> or should I get a >= 6V one?
[22:38:27] <tocix> I'm asking because the board won't boot (HTLC ad infinitum) unless I hold the RESET button while plugging in the adapter. However, by holding reset while it's booting it's showing crap on the debug serial as if I don't have the right baudrate.
[22:39:04] <tocix> And when I release the RESET button, it's back to the old HTLC.
[22:42:19] <tocix> Well the manual says I should provide 5V at 1A.
IRC #olimex 2017-02-23
[00:03:16] <kamaradclimber> Hello, I've just received a A20 OlinuXino Lime2. When plugged, red led is on, ethernet green (orange blinking slowly indicating activity) but nothing else happens: no hdmi output or dhcp request on the network. I've tried official debian image and archlinux arm image. Could you point me to documentation/troubleshooting guide to understand what happens? Thx[22:35:03] <tocix> Hello.
[22:36:09] <tocix> is a 5V 3A adapter good enough for imx233-olinuxino-micro?
[22:37:05] <tocix> or should I get a >= 6V one?
[22:38:27] <tocix> I'm asking because the board won't boot (HTLC ad infinitum) unless I hold the RESET button while plugging in the adapter. However, by holding reset while it's booting it's showing crap on the debug serial as if I don't have the right baudrate.
[22:39:04] <tocix> And when I release the RESET button, it's back to the old HTLC.
[22:42:19] <tocix> Well the manual says I should provide 5V at 1A.
