ESP32-POE-ISO-EA-16MB full assembly .step file

[Ol!mexGoody]

I have the ESP32-POE-ISO-EA-16MB and would like a full assembly .step file so I can design a rack mount for it in Fusion.

I found this https://github.com/OLIMEX/ESP32-POE/tree/master/HARDWARE and tried to make sense of KiCad to extract the full assembly, but I keep running into export errors.

Is the full assembly of the ESP32-POE-ISO-EA-16MB available anywhere in .step and/or .stl without requiring knowledge of how to navigate KiCad?

[LubOlimex]

It is a good idea to also look at a ready 3D designs, there are many box designs online for ESP32-POE-ISO that can be used as basis. Our boxes also have 3D design files available for download:

https://www.olimex.com/Products/IoT/ESP32/BOX-ESP32-POE-ISO/

Now for the ESP32-POE-ISO I have exported STEP here:

https://ftp.olimex.com/TEMP/ESP32-PoE-ISO-step-export/ESP32-PoE-ISO_Rev_L.step

Notice that I haven't double checked if the dimensions in the export are 100% consistent with each component. We don't need component height during manufacturing so some components can be a bit off. My advice is to also always compare the STEP file with the real board (empirically measure heights).

In future you can export from KiCAD on your won, it is the free software we use to design these boards. Install KiCAD and download the sources from the GitHub page for ESP32-POE-ISO, open the project file in KiCAD, open the PCB layout editor, and click File -> Export and chose one of the formats. Furthermore, there is a built-in 3D viewer in KiCAD, again open the PCB and navigate to View -> 3D Viewer.