December 07, 2024, 10:58:30 PM

OLIMEXINO-328 INSTALL ARDUINO 1.8.19

Started by anders, August 23, 2022, 08:47:10 PM

Previous topic - Next topic

anders

WIN 10, OLIMEXINO-328, INSTALLed ARDUINO 1.8.19 IDE, USB-cable,
olimex docs are NOT updated, link to JSON files does not excist.
Can someone describe in detail how I should proceed to be able to use olimexino-328!

anders

Also a driver needs to be installed according to the docs, which one?
There is a large amount of drivers to choose from.
In my case, I intend to use USB cable from computer, WIN10.

LubOlimex

For OLIMEXINO-328 add this JSON in "Preferences"

https://raw.githubusercontent.com/OLIMEX/Arduino_configurations/master/AVR/package_olimex_avr_index.json

Remember to install the package afterwards (from "Tools").

This is good guide that while outdated shows the general approach:

https://www.olimex.com/Products/Duino/_resources/Arduino_instructions.pdf
Technical support and documentation manager at Olimex