STMP157-SOM LCD display support in OLinuXino image

Started by Titomax, September 01, 2021, 03:45:20 pm

Previous topic - Next topic

Titomax

Hi,
I'm using the new SOM based on STM32MP1 micro to replace an old design based on A13-SOM.
I connected the SOM to an Olimex LCD display 7" (no touchscreen).

I downloaded the image "STM32MP1-OLinuXino-SOM-focal-minimal-20210821-133514.img.7z" and tried to boot from the generated SD. It works even if the console on the LCD display is not correctly centered.

I need the graphic environment to open a Chromium browser in a window on the LCD display.

How can I launch the graphic environment ? Is it supported on the standard image ?

Thanks in advance.



LubOlimex

Currently, there is no software support for STM32 boards and the displays in Olimage image. We are working on such for a future release. Once it is available you would be able to configure the software for LCD output using the olinuxino-display script.

You still would need console access to the board to execute the script.

For more info refer to this document:

https://github.com/OLIMEX/OLINUXINO/blob/master/DOCUMENTS/OLIMAGE/Olimage-guide.pdf
Technical support and documentation manager at Olimex