I2S microphone connection pins ESP32-DevKit-Lipo

Started by iarakis, April 06, 2021, 05:14:11 pm

Previous topic - Next topic

iarakis

Hi,

I have a ESP32-DevKit-Lipo  and need to communicate with ICS43434 microphone through i2s.


My i2s pin setup does not seam to be correct.

 
        .bck_io_num = 26,  // IIS_SCLK
        .ws_io_num = 32,   // IIS_LCLK
        .data_out_num = -1,// IIS_DSIN
        .data_in_num = 33  // IIS_DOUT

Can someone point the correct pin setup for i2s?

I am using the code here   https://blog.squix.org/2019/08/esp32-esp-eye-browser-based-spectrum-analyzer.html

LubOlimex

You can use free pin (as long as it is free, and as long as you don't try to use input-only GPI pins for output). On first look the pins you use look fine. Maybe double check your hardware connections.
Technical support and documentation manager at Olimex

Brian

Do not leave pin 2 (LR) on  ICS43434 float. Connect to ground and read data from left channel of i2s driver.