A13 OlinuXino WiFi Rev.F, bullseye-minimal-20220928 get's stuck and wont boot

Started by mauricio, January 02, 2023, 04:27:33 PM

Previous topic - Next topic

mauricio

Hello, happy new year !

I've downloaded A13-OLinuXino-bullseye-minimal-20220928-143706.img.7z from the https://images.olimex.com/release/a13/ location

I uncompressed and copied the image to a micro SD Card, and powered A13. Monitoring it through a serial/USB cable attached to UART1, to my laptop, using command

screen /dev/ttyUSB0 115200

A13 get stuck as the following shows

U-Boot SPL 2021.04+olimex-1-20220927.105322 (Sep 27 2022 - 10:54:20 +0000)
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
A13 Board no eeprom found!
 PMIC found board is A13-OLinuXino/ A13-OLinuXino WIFI !
Trying to boot from MMC1


U-Boot 2021.04+olimex-1-20220927.105322 (Sep 27 2022 - 10:54:20 +0000) Allwinner Technology

CPU:   Allwinner A13 (SUN5I)
ID:    A13-OLinuXino Rev.AI2C:   ready
DRAM:  512 MiB
MMC:   mmc@1c0f000: 0
Loading Environment from EXT4... *** Warning - bad CRC, using default environment

Loading Environment from FAT... ** No device specified **
Setting up a 1024x768 vga console (overscan 0x0)
In:    serial
Out:   vga
Err:   vga
Allwinner mUSB OTG (Peripheral)
Net:   


That's at the first boot. When pushing Reset button, at second boot it say's

U-Boot SPL 2021.04+olimex-1-20220927.105322 (Sep 27 2022 - 10:54:20 +0000)
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
A13 Board no eeprom found!
 PMIC found board is A13-OLinuXino/ A13-OLinuXino WIFI !
Trying to boot from MMC1


U-Boot 2021.04+olimex-1-20220927.105322 (Sep 27 2022 - 10:54:20 +0000) Allwinner Technology

CPU:   Allwinner A13 (SUN5I)
ID:    A13-OLinuXino Rev.AI2C:   ready
DRAM:  512 MiB
MMC:   mmc@1c0f000: 0
Loading Environment from EXT4... *** Warning - bad CRC, using default environment

Loading Environment from FAT... ** No device specified **
Setting up a 1024x768 vga console (overscan 0x0)
In:    serial
Out:   vga
Err:   vga
Allwinner mUSB OTG (Peripheral)
Net:   eth0: usb_ether
starting USB...
Bus usb@1c14000: USB EHCI 1.00
Bus usb@1c14400: USB OHCI 1.0
scanning bus usb@1c14000 for devices... 3 USB Device(s) found
scanning bus usb@1c14400 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2022 bytes read in 3 ms (658.2 KiB/s)
## Executing script at 43100000
Checking for /uEnv.txt...
Checking for /boot/uEnv.txt...
400 bytes read in 3 ms (129.9 KiB/s)
Loaded environment from /boot/uEnv.txt
Loading FIT image...
15811123 bytes read in 1262 ms (11.9 MiB/s)
## Loading kernel from FIT Image at 58000000 ...
   Using 'config-4432' configuration
   Trying 'kernel-1' kernel subimage
     Description:  Linux kernel 5.10.105-olimex
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x580000d4
     Data Size:    6533568 Bytes = 6.2 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x40080000
     Entry Point:  0x40080000
     Hash algo:    crc32
     Hash value:   07bbff0b
     Hash algo:    sha1
     Hash value:   61e0951c1f96b692559776eea6464ee2d09fb02c
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading ramdisk from FIT Image at 58000000 ...
   Using 'config-4432' configuration
   Trying 'ramdisk-1' ramdisk subimage
     Description:  Ramdisk for kernel 5.10.105-olimex
     Type:         RAMDisk Image
     Compression:  Unknown Compression
     Data Start:   0x5863b3c8
     Data Size:    9207329 Bytes = 8.8 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x4fe00000
     Entry Point:  0x4fe00000
     Hash algo:    crc32
     Hash value:   1f6cea65
     Hash algo:    sha1
     Hash value:   1e17fbe5de901a7e71b051e09c960b5d890456b0
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Loading ramdisk from 0x5863b3c8 to 0x4fe00000
WARNING: 'compression' nodes for ramdisks are deprecated, please fix your .its file!
## Loading fdt from FIT Image at 58000000 ...
   Using 'config-4432' configuration
   Trying 'fdt-1' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x58f032d8
     Data Size:    23020 Bytes = 22.5 KiB
     Architecture: ARM
     Load Address: 0x4fa00000
     Hash algo:    crc32
     Hash value:   fe1e1efe
     Hash algo:    sha1
     Hash value:   0d226f727ca4493b9350ba2eb9ea4f28667dfaec
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Loading fdt from 0x58f032d8 to 0x4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Kernel Image
   Loading Ramdisk to 49738000, end 49fffe21 ... OK
   Loading Device Tree to 4972f000, end 497379eb ... OK

Starting kernel ...


Third time I try to boot is different (sorry I can't get the whole output)

...
Device 0: unknown device
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-de-ad-be-ef-00-01
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi-a13_olinuxino
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.Config file not found
using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in
MAC de:ad:be:ef:00:01
HOST MAC de:ad:be:ef:00:00
RNDIS ready
The remote end did not respond in time.=>


At the second output I can read:

WARNING: 'compression' nodes for ramdisks are deprecated, please fix your .its file!
But I don't know what that means neither how to fix or where that files are

Please any help is welcome

Thanks

LubOlimex

It appears the board is attempting to boot from the network but fails (which is normal since the board is not meant to boot from the network). What is more important is that this means it also failed to boot from other sources (like the microSD card).

I believe it is some sort of issue with the microSD card or the image or how it was prepared.

1. Can you try with the base image instead? Namely "A13-OLinuXino-bullseye-base-20220928-143706.img.7z".

2. Can you try to prepare the card with the free version of balenaEtcher software?
Technical support and documentation manager at Olimex

mauricio

#2
Hello, thanks

I did try what you suggested

the base image and using BalenaEtcher

get similar results

I've not a new sd card to try by now, hopefully by the weekend I get one and try again

I'd like to say that I also tried (same sd card) the A13_debian_34_90_mainline_u-boot_release_11_3.7z image and it starts ok

Thanks

mauricio

Hello

Sorry to say I tried a new SD card, same results

Please any news or advise about are very welcome

Thanks

LubOlimex

Hmm, it seems it hangs here too, I found two revision F boards. Same behavior. Investigating it.

Seems to boot fine with this older Armbian-based image:

https://ftp.olimex.com/Allwinner_Images/A13-OLinuXino/1.latest_mainline_images/bionic/Armbian_5.92_Olinuxino-a13_Ubuntu_bionic_next_5.3.8_desktop.zip

So it is likely a software configuration issue between latest image and older board revisions.

Edit: It seems to also work with the even older sunxi image from here: https://ftp.olimex.com/Allwinner_Images/A13-OLinuXino/2.legacy_images_kernel_3.4.x/A13_debian_34_90_mainline_u-boot_release_11_3.7z
Technical support and documentation manager at Olimex

mauricio

Thank you @LubOlimex

I've installed Armbian_5.92_Olinuxino-a13_Ubuntu_bionic_next_5.3.8_desktop.zip and it works, boot ok

And I was able to install node-red, which was my goal

Hopefully bullseye become available sometime. Above all a headless distro.

Thanks

LubOlimex

I've notified the developers. I guess RAM memory was changed between revisions and the latest image would not boot on all older revisions. Will see what the Linux guys come up with. Hopefully it would be a quick fix.
Technical support and documentation manager at Olimex