July 19, 2024, 03:32:41 AM


Started by asmblur, January 21, 2021, 08:12:46 AM

Previous topic - Next topic


What is the purpose of the OTG_EN and OTG_FAULT pins?  My assumption would be that OTG_EN is an active-high enable for SY6280 to produce "+5V OTG PWR". I would also assume that RB5 drives OTG_EN high.  OTG_FAULT would seem to be an input of the PIC indicating a fault(too much draw maybe/short maybe?) on the "+5V OTG PWR" line.

And finally, the USBID:

TRISFbits.TRISF3 = 1; // Make RF3/USBID input
CNPUFbits.CNPUF3 = 1; // Pull-up enables on RPF3 (To set USB as a B-Device )

Is this enough to ensure the USB module operates in "device" mode?