Setting up Olimex ARM-USB-TINY-H.

Started by HenryHunter, January 14, 2021, 01:15:44 pm

Previous topic - Next topic

HenryHunter

January 14, 2021, 01:15:44 pm Last Edit: January 15, 2021, 03:53:47 pm by HenryHunter
Hello everyone, this is my first post here.
I have developed an BLE-WiFi app on STM32F412+CYW43434W based DevKit. Now I try to move to our proprietary hardware and use Olimex's ARM-USB-TINY-H programmer debug adapter, rather than the DevKit's FTDI chip.
I can not find any single understandable instructions as how it is done.
Thank. router login

JohnS

Your proprietary hardware has JTAG?

What (software) tool do you want to use?

If you just want to flash software you don't even need JTAG or the Olimex TINY-H, just put the CPU chip into programming mode (see its datasheets).

John