oLinuxino MAXI mcp2515?

Started by kislein, July 09, 2020, 07:23:15 pm

Previous topic - Next topic


July 09, 2020, 07:23:15 pm Last Edit: July 12, 2020, 02:31:29 pm by kislein Reason: spelling
Hello All

I've been playing around with the olinuxino maxi board and have been trying for a few days now to get the mcp2515 to play nice with my board.  I learned about the device tree as I am a bit new at modifying device/board level kernel paramters..  I understand the concept but still seem to be missing some key low level paramters.

Anyways, here goes...

I have the following electrical connections:
1) CS tied to UEXT_CS
2) SCK tied to SSP2_SCK
3) SI tied to SSP2_MOSI Flying Together
4) SO tied to PIN9/LCD_D08/SSP2_MISO
5) INT tied to AUART1_TXD
I am guessing that I have the wrong gpio setting or something like that, or maybe I do not have a complete dts definition for the mcp2515 part to work... any guidance would be greatly appreciated!



Which dts are you using?

I doubt you have INT right, BTW.