December 12, 2019, 01:08:28 pm

olimexino 32u4 shields

Started by lmntorras.95, October 07, 2012, 10:14:06 pm

Previous topic - Next topic

lmntorras.95

Hi
I want to buy this board! (https://www.olimex.com/Products/Duino/AVR/OLIMEXINO-32U4/ )
but i have on con of buying it because i need to know if it is compatible with some shields like those:
http://store.arduino.cc/eu/index.php?main_page=product_info&cPath=11_5&products_id=89
http://www.seeedstudio.com/depot/grove-base-shield-p-754.html?cPath=132_134
http://store.arduino.cc/eu/index.php?main_page=product_info&cPath=11_5&products_id=123
http://store.arduino.cc/eu/index.php?main_page=product_info&cPath=11_5&products_id=199
shields like those please answer quickly ;D thank you
(those links are examples but they are compatible with arduino leonardo http://arduino.cc/en/Main/ArduinoBoardLeonardo and i need to know if this board is compatible with those shields   )

olimex

OLIMEXINO-32U4 should work with any Arduino shields both 3.3V and 5V
we never try the shields you link but there should be no problem

lmntorras.95

thanks for the reply and one further question can i do this with this board?
(http://blog.makezine.com/2011/10/10/how-to-shrinkify-your-arduino-projects/)
and i can program this board olimexino 32u4 with this program?
(http://arduino.cc/en/Main/Software)

maria_olimex

Hello,
some people have tried using a leonardo as ISP for a ATtiny45 here: http://arduino.cc/forum/index.php?topic=118090.0  , but we have never tried it with a 32u4.
The olimexino 32u4 comes pre-programmed with a bootloader out of the box; the arduino IDE connects to the bootloader via a USB cable and uploads your code.

Regards,
Maria

Software developer at Olimex
Olimex ODS Project
Introduction to Olimex ODS