Welcome, Guest

Author Topic: Olimex ENC28J60 ethernet adapter to imx233  (Read 603 times)

anhcsueb

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Olimex ENC28J60 ethernet adapter to imx233
« on: October 18, 2018, 12:31:00 AM »
Hello everyone,

Does anyone know how to wire the Olimex ENC28J60 ethernet adapter to the imx233 processor?

ENC28J60
Pin#
1 SCK 6 CLKOUT
2 MOSI 7 CS
3 MISO 8 RST
4 WOL 9 GND
5 INT 10 3.3V

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1947
  • Karma: +50/-3
Re: Olimex ENC28J60 ethernet adapter to imx233
« Reply #1 on: October 18, 2018, 08:07:01 AM »
Technical support and documentation manager at Olimex

anhcsueb

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Olimex ENC28J60 ethernet adapter to imx233
« Reply #2 on: October 19, 2018, 10:49:01 PM »
great project, but the picture on the project, i could not make out which pin goes to which. Anyone have any idea?

JohnS

  • Hero Member
  • *****
  • Posts: 1723
  • Karma: +33/-48
Re: Olimex ENC28J60 ethernet adapter to imx233
« Reply #3 on: October 20, 2018, 04:08:41 PM »
I'd figure power & gnd, then the signalling pins from the datasheet - bear in mind it'll just not work if you get these ones wrong but will do no damage so long as you got power & gnd right.