LIME2 - Can't get an IPv4 address from DHCP server

Started by roukydesbois, January 16, 2021, 07:51:30 PM

Previous topic - Next topic

LubOlimex

#15
If we use the same software, the same board and we get different results (working here, not working at your side) - this means only one thing - the issue is not in the board, nor it is in the Linux image. I suspect the network equipment settings (router, switch, etc) - DHCP settings, firewall settings, etc.
Technical support and documentation manager at Olimex

roukydesbois

You're probably right, and indeed the router in my place is quite old. I'm going to browse through the release notes, but do you know of any network protocol/functionality that was deprecated between the 2 kernel versions?

LubOlimex

It would be easier to look for the exact model router and if someone reported problems with newer Linux
Technical support and documentation manager at Olimex