Welcome, Guest

Author Topic: Getting i2c to work under Linux olimex 4.15.0-sunxi system  (Read 546 times)

roderick

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Getting i2c to work under Linux olimex 4.15.0-sunxi system
« on: July 13, 2018, 05:19:51 PM »
Hello,
according to "uname -a", I've got a Linux olimex 4.15.0-sunxi system.
I've successfully installed the following kernel headers: linux-headers-dev-sunxi and also linux-headers-next-sunxi.

When I execute the "armbian-add-overlay" command from /boot/overlay-users, I've got the next error message:
"Kernel headers are not installed properly. Please install the kernel headers package"

Can anybody help me with this?

Thanks in advance

JohnS

  • Hero Member
  • *****
  • Posts: 1709
  • Karma: +33/-45
Re: Getting i2c to work under Linux olimex 4.15.0-sunxi system
« Reply #1 on: July 27, 2018, 10:57:41 PM »
Sounds like it's armbian in which case ask in an armbian place.

John

igorpec

  • Jr. Member
  • **
  • Posts: 95
  • Karma: +17/-0
Re: Getting i2c to work under Linux olimex 4.15.0-sunxi system
« Reply #2 on: August 08, 2018, 12:36:23 PM »
Sounds like it's armbian in which case ask in an armbian place.

John

It doesn't look official Armbian. The latest stable build is 4.14.y There is no overlay support for more recent and it is normal that it doesn't work ... this will be fixed (it is already) in next stable build, which will be 4.18.y
linux for ARM development boards
www.armbian.com