Started by APL, January 16, 2018, 05:37:47 pm
Quote from: Stanimir5F on January 23, 2018, 04:49:56 pmHello APL!1) Do you see any kind of webpage? Something like this.
Quote from: Stanimir5F on January 23, 2018, 04:49:56 pm2) I'm not very familiar with 4.02v of the Microchip stack because it has been released more than 10 years ago and I have worked mostly with 5.00 and newer. But from what I can see from the sources this version doesn't support dynamic update of the webpage and the only way to change it (webpage) is through the sources. But this includes reprogramming which is the bigger problem.
Quote from: Stanimir5F on January 23, 2018, 04:49:56 pm3) MPFS2 tool is just a generator of either *.bin or *.c or another type of output file to content the page, so yes, it is included in the stack 4.02
Quote from: LubOlimex on January 23, 2018, 05:55:11 pmI managed to get ICD2 working with Windows 10 and MPLAB 8. Have to test a bit more and take screenshots and will give you instructions tomorrow. So you can don't have to worry about 4.02 but upload the latest demo.
Quote from: LubOlimex on January 24, 2018, 01:01:19 pmWe never clarified which ICD2 you have exactly, but I hope it is PIC-ICD2-POCKET. So, to get Olimex PIC-ICD2-POCKET working under Windows 10:1. Ensure that the proper driver is loaded. This operation might require manual driver change. When properly installed the device should be listed as "Microchip Custom USB Device" under "Custom USB Devices" tab in Windows "Device Manager".1.1. Go to Windows "Device Manager". Use the search any type "device manager" if you have trouble.1.2. Find how PIC-ICD2-POCKET gets listed. If you can't find it, disconnect and reconnect it until you have identified the entry associated with it. If the entry is "Microchip Win USB device" then it is NOT properly recognized and you need to change the driver.