December 08, 2024, 11:20:34 AM

eMega / 24LC256 / AT45BD

Started by yoyo027, December 21, 2012, 11:02:37 AM

Previous topic - Next topic

yoyo027

Hello,

I've tried to program both 24LC eeprom and AT45 spi flash ram with no success on my eMega.
After that, I tried to measure voltage on both VCC pins of 24LC and flash ram.
Surprising, I've got 0V for both ? While I should read 3.3V  :'(
Be sure the eMega was powered before taking measure  ;)
Looking at C66, it's the same problem, 0 volt.
It's also the same thing for A2 of 24LC...

Is someone as the same problem ?
Is it a normal situation ?
Do I have to setup a switch ?

Merry Christmas,

Yoyo.