[SOLVED] WLAN doesn't work

Started by mach.lee, March 13, 2016, 07:55:21 AM

Previous topic - Next topic

mach.lee

I'm having tests with RT5350F-OLinuXino-EVB.
It worked fine with every feature. But since yesterday only WLAN doesn't work.
When power is up, WLAN_ACT blink for a second and never on later.
This is dmesg and ifconfig.
Please give me any kind of hint of help.


root@OpenWrt:/# dmesg
[    0.000000] Linux version 3.18.19 (stefan@debian) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r45456) )5
[    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
[    0.000000] MIPS: machine is RT5350F-OLINUXINO
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 802da0d0, node_mem_map 810063c0
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=0003c4e8
[    0.000000] Readback ErrCtl register=0003c4e8
[    0.000000] Memory: 29016K/32768K available (2401K kernel code, 123K rwdata, 480K rodata, 188K init, 181K bss,)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 360MHz
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.010000] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.090000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.110000] pinctrl core: initialized pinctrl subsystem
[    0.120000] NET: Registered protocol family 16
[    0.130000] rt2880-pinmux pinctrl: try to register 28 pins ...
[    0.130000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[    0.130000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[    0.130000] pinctrl core: add 4 pinmux maps
[    0.130000] rt2880-pinmux pinctrl: found group selector 4 for jtag
[    0.130000] rt2880-pinmux pinctrl: invalid group "rgmii" for function "gpio"
[    0.140000] rt2880-pinmux pinctrl: invalid group "mdio" for function "gpio"
[    0.150000] rt2880-pinmux pinctrl: found group selector 2 for uartf
[    0.150000] rt2880-pinmux pinctrl: request pin 17 (io17) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 18 (io18) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 19 (io19) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 20 (io20) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 21 (io21) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 7 (io7) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 8 (io8) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 9 (io9) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 10 (io10) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 11 (io11) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 12 (io12) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 13 (io13) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: request pin 14 (io14) for pinctrl
[    0.150000] rt2880-pinmux pinctrl: failed to lookup the sleep state
[    0.180000] rt2880_gpio 10000600.gpio: registering 22 gpios
[    0.190000] rt2880_gpio 10000600.gpio: registering 22 irq handlers
[    0.200000] rt2880_gpio 10000660.gpio: registering 6 gpios
[    0.210000] rt2880_gpio 10000660.gpio: registering 6 irq handlers
[    0.220000] Switched to clocksource systick
[    0.230000] NET: Registered protocol family 2
[    0.240000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.250000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.260000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.280000] TCP: reno registered
[    0.280000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.290000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.310000] NET: Registered protocol family 1
[    0.320000] rt-timer 10000100.timer: maximum frequency is 7324Hz
[    0.330000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[    0.330000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.360000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.370000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.390000] msgmni has been set to 56
[    0.430000] io scheduler noop registered
[    0.440000] io scheduler deadline registered (default)
[    0.450000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[147]
[    0.460000] drivers/phy/phy-ralink-usb.c:ralink_usb_phy_probe[161]
[    0.480000] rt2880-pinmux pinctrl: request pin 14 (io14) for pio:14
[    0.480000] rt2880-pinmux pinctrl: request pin 12 (io12) for pio:12
[    0.480000] rt2880-pinmux pinctrl: request pin 0 (io0) for pio:0
[    0.480000] gpio-export gpio_export: 3 gpio(s) exported
[    0.490000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.500000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[    0.500000] pinctrl core: add 1 pinmux maps
[    0.500000] rt2880-pinmux pinctrl: found group selector 3 for uartlite
[    0.500000] rt2880-pinmux pinctrl: request pin 15 (io15) for 10000c00.uartlite
[    0.500000] rt2880-pinmux pinctrl: request pin 16 (io16) for 10000c00.uartlite
[    0.500000] console [ttyS0] disabled
[    0.510000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a 16550A
[    0.530000] console [ttyS0] enabled
[    0.540000] bootconsole [early0] disabled
[    0.560000] pinctrl core: add 1 pinmux maps
[    0.560000] pinctrl core: add 1 pinmux maps
[    0.560000] rt2880-pinmux pinctrl: found group selector 1 for spi
[    0.560000] rt2880-pinmux pinctrl: found group selector 6 for spi_cs1
[    0.560000] rt2880-pinmux pinctrl: request pin 3 (io3) for 10000b00.spi
[    0.560000] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000b00.spi
[    0.560000] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000b00.spi
[    0.560000] rt2880-pinmux pinctrl: request pin 6 (io6) for 10000b00.spi
[    0.560000] rt2880-pinmux pinctrl: request pin 27 (io27) for 10000b00.spi
[    0.570000] m25p80 spi32766.0: found en25q64, expected s25fl064k
[    0.590000] m25p80 spi32766.0: en25q64 (8192 Kbytes)
[    0.600000] 4 ofpart partitions found on MTD device spi32766.0
[    0.610000] Creating 4 MTD partitions on "spi32766.0":
[    0.620000] 0x000000000000-0x000000030000 : "u-boot"
[    0.630000] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.640000] 0x000000040000-0x000000050000 : "factory"
[    0.650000] 0x000000050000-0x000000800000 : "firmware"
[    0.740000] 2 uimage-fw partitions found on MTD device firmware
[    0.760000] 0x000000050000-0x000000158ccb : "kernel"
[    0.770000] 0x000000158ccb-0x000000800000 : "rootfs"
[    0.780000] mtd: device 5 (rootfs) set to be root filesystem
[    0.790000] 1 squashfs-split partitions found on MTD device rootfs
[    0.800000] 0x0000003d0000-0x000000800000 : "rootfs_data"
[    0.830000] ralink_soc_eth 10100000.ethernet: generated random MAC address 12:1a:da:41:a8:1a
[    0.840000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
[    0.860000] rt2880_wdt 10000120.watchdog: Initialized
[    0.870000] TCP: cubic registered
[    0.880000] NET: Registered protocol family 17
[    0.890000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load .
[    0.910000] 8021q: 802.1Q VLAN Support v1.8
[    0.950000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    0.970000] Freeing unused kernel memory: 188K (802f1000 - 80320000)
[    3.980000] init: Console is alive
[    3.990000] init: - watchdog -
[    8.260000] usbcore: registered new interface driver usbfs
[    8.270000] usbcore: registered new interface driver hub
[    8.280000] usbcore: registered new device driver usb
[    8.360000] SCSI subsystem initialized
[    8.380000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.400000] ehci-platform: EHCI generic platform driver
[    8.610000] phy phy-usbphy.0: remote usb device wakeup disabled
[    8.620000] phy phy-usbphy.0: UTMI 16bit 30MHz
[    8.630000] ehci-platform 101c0000.ehci: EHCI Host Controller
[    8.640000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
[    8.660000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
[    8.690000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
[    8.700000] usb usb1: no of_node; not parsing pinctrl DT
[    8.700000] hub 1-0:1.0: no of_node; not parsing pinctrl DT
[    8.700000] hub 1-0:1.0: USB hub found
[    8.710000] hub 1-0:1.0: 1 port detected
[    8.720000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.740000] ohci-platform: OHCI generic platform driver
[    8.750000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
[    8.760000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
[    8.780000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
[    8.850000] usb usb2: no of_node; not parsing pinctrl DT
[    8.850000] hub 2-0:1.0: no of_node; not parsing pinctrl DT
[    8.850000] hub 2-0:1.0: USB hub found
[    8.860000] hub 2-0:1.0: 1 port detected
[    8.880000] usbcore: registered new interface driver usb-storage
[    9.100000] init: - preinit -
[   10.600000] rt305x-esw 10110000.esw: link changed 0x00
[   10.920000] random: procd urandom read with 17 bits of entropy available
[   12.240000] rt305x-esw 10110000.esw: link changed 0x10
[   14.370000] mount_root: loading kmods from internal overlay
[   15.630000] jffs2: notice: (324) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (.
[   15.670000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   15.700000] block: extroot: not configured
[   15.950000] jffs2: notice: (321) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (.
[   16.980000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   17.000000] block: extroot: not configured
[   17.010000] mount_root: switching to jffs2 overlay
[   17.080000] procd: - early -
[   17.080000] procd: - watchdog -
[   18.250000] procd: - ubus -
[   19.270000] procd: - init -
[   20.820000] NET: Registered protocol family 10
[   20.850000] ntfs: driver 2.1.31 [Flags: R/O MODULE].
[   20.880000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   20.920000] i2c /dev entries driver
[   20.930000] pinctrl core: add 1 pinmux maps
[   20.930000] rt2880-pinmux pinctrl: found group selector 0 for i2c
[   20.930000] rt2880-pinmux pinctrl: request pin 1 (io1) for 10000900.i2c
[   20.930000] rt2880-pinmux pinctrl: request pin 2 (io2) for 10000900.i2c
[   20.930000] i2c-ralink 10000900.i2c: loaded
[   20.950000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[   20.970000] Backport generated by backports.git backports-20150129-0-gdd4a670
[   20.990000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.020000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
[   21.110000] xt_time: kernel timezone is -0000
[   21.170000] cfg80211: Calling CRDA to update world regulatory domain
[   21.200000] cfg80211: World regulatory domain updated:
[   21.210000] cfg80211:  DFS Master region: unset
[   21.220000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   21.240000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.250000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.270000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   21.280000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   21.300000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   21.320000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   21.330000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   21.350000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   21.480000] PPP generic driver version 2.4.2
[   21.490000] NET: Registered protocol family 24
[   21.560000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected
[   21.570000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected
[   21.590000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   26.450000] rt305x-esw 10110000.esw: link changed 0x00
[   28.100000] rt305x-esw 10110000.esw: link changed 0x10
[   33.870000] device eth0.1 entered promiscuous mode
[   33.880000] device eth0 entered promiscuous mode
[   33.950000] br-lan: port 1(eth0.1) entered forwarding state
[   33.960000] br-lan: port 1(eth0.1) entered forwarding state
[   35.960000] br-lan: port 1(eth0.1) entered forwarding state
[   79.920000] random: nonblocking pool is initialized


root@OpenWrt:/# ifconfig
br-lan    Link encap:Ethernet  HWaddr D6:27:D3:D6:DB:42 
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::d427:d3ff:fed6:db42/64 Scope:Link
          inet6 addr: fd58:b874:1131::1/60 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:2836 (2.7 KiB)

eth0      Link encap:Ethernet  HWaddr 12:1A:DA:41:A8:1A 
          inet6 addr: fe80::101a:daff:fe41:a81a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:42 errors:0 dropped:0 overruns:0 frame:0
          TX packets:93 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:5548 (5.4 KiB)  TX bytes:11295 (11.0 KiB)
          Interrupt:5

eth0.1    Link encap:Ethernet  HWaddr 12:1A:DA:41:A8:1A 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:3541 (3.4 KiB)

eth0.2    Link encap:Ethernet  HWaddr D6:27:D3:D6:DB:43 
          inet addr:192.168.0.134  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::d427:d3ff:fed6:db43/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:42 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4792 (4.6 KiB)  TX bytes:5856 (5.7 KiB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:66 errors:0 dropped:0 overruns:0 frame:0
          TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:5160 (5.0 KiB)  TX bytes:5160 (5.0 KiB)


According to this page https://wiki.openwrt.org/doc/uci/wireless
QuoteBy default the wireless is OFF. You can turn it on in the /etc/config/wireless by changing disabled 1 to disabled 0
I can't understand how could I access wifi at the first time.
Anyway It's cleared.