Welcome, Guest

Author Topic: A10-OLINUXINO-LIME and RGB LCD pinout  (Read 2458 times)

carossopatrick

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
A10-OLINUXINO-LIME and RGB LCD pinout
« on: April 10, 2015, 11:14:59 AM »
Hello all,
I need to interface the A10-OLINUXINO-LIME to several different LCD displays, and I'm preparing suitable adapters. On the board manual I've found the 40-pins LCD connector pinout. The functions of DE,VSYNC,HSYNC and CLK are clear. But what about the 24 LCD_DXX? My display has 6 wires for each color. How am I supposed to connect them? In the board manual I've read about a "Connectors and adapters page", on which are available schematics, but I was not able to find it. What is the exact link?
Thank you very much for your help.
Patrick

JohnS

  • Hero Member
  • *****
  • Posts: 1725
  • Karma: +33/-48
Re: A10-OLINUXINO-LIME and RGB LCD pinout
« Reply #1 on: April 10, 2015, 11:47:42 AM »
Maybe it's clearer from either the AW data sheet(s) or schematics for other boards (there are quite a few on the net - you can check all of A13, A10, A20 at least)?

John

carossopatrick

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: A10-OLINUXINO-LIME and RGB LCD pinout
« Reply #2 on: April 10, 2015, 01:50:36 PM »
Thank you,
I've found the schematics on the LCD page.

dave-at-axon

  • Hero Member
  • *****
  • Posts: 625
  • Karma: +18/-0
Re: A10-OLINUXINO-LIME and RGB LCD pinout
« Reply #3 on: April 11, 2015, 05:05:40 AM »
LCD_DXX is the 24 bit RGB signals so this means 8 bit per RED, GREEN and BLUE.

The datasheet indicates which is RED, GREEN and BLUE.

If your board is only 6 for color, simply use the upper 6 bits and leave the lower 2 unconnected. The human eye won't detect the difference.

The A20 can also do LVDS so you need to check the datasheet for the correct wiring for this option.