Welcome, Guest

Author Topic: how to use CSI0 on GPIO2  (Read 1751 times)

yoann_q

  • Newbie
  • *
  • Posts: 48
  • Karma: +0/-0
    • my blog
how to use CSI0 on GPIO2
« on: July 06, 2014, 04:13:36 PM »
hi,
as indicated on the A10 datasheet avalaible here http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf (page 24) the CSI0 (camera interface) can be accessed if mode 3 is activated , the interface is connected to GPIO 2 PE0/1...
so , how to activate the mode 3 functions and is there a linux driver to access this after activation
best regards