My A10 - lime can't reboot, it needs hardware reset.

Started by AxR, May 19, 2014, 03:23:18 pm

Previous topic - Next topic

AxR

hi,

My A10 lime can't be rebooted using the reboot shell command.

The boot process starts, but it stops after those lines:
<6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<6>[uart]: used uart info.: 0x11
<6>[uart]: serial probe 0 irq 1 mapbase 0x01c28000
<6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A

.. and then the A10 tries again to reboot endless automatically.

Any suggestions

thanks.

JohnS

Maybe isn't implemented.  Lots of kernel features are in flux.

Try a recent one and maybe it will work.

John