Welcome, Guest

Author Topic: Where are schematics / pinouts plus header info.  (Read 2439 times)

Robert Leacroft

  • Newbie
  • *
  • Posts: 18
  • Karma: +1/-0
Where are schematics / pinouts plus header info.
« on: January 13, 2014, 02:09:15 PM »
Hi,

I must be getting old but I cannot find any links to the Lime schematic and pinsouts etc. The wiki page appears to have nothing in it. Up to now I have been experimenting with the A10S and you have lots of information about this but I am obviously going to have to change before going into production and some information would be useful.
Another post mentions the schematic so I guess it must exist.     Apologies if it is an obvious place and I am just missing it.

There was mention in an earlier post about adapters for the Lime headers. Was this just a reference to the socket to socket cable you already sell or is there perhaps going to be a pcb or cable to convert 1.5mm to 2.54 mm pins?

Robert

Lurch

  • Sr. Member
  • ****
  • Posts: 272
  • Karma: +11/-0
Re: Where are schematics / pinouts plus header info.
« Reply #1 on: January 13, 2014, 02:21:38 PM »
check here: https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE
some of the data is still missing, but then it's a 'developer' edition up to now.

Robert Leacroft

  • Newbie
  • *
  • Posts: 18
  • Karma: +1/-0
Re: Where are schematics / pinouts plus header info.
« Reply #2 on: January 13, 2014, 10:03:30 PM »
Thanks for that Lurch.  I can at least now marry the pcb pinouts to A10 data from the Cubieboard that I also already have.

Robert