Welcome, Guest

Author Topic: Typo in pdf for pic32-t795h?  (Read 1724 times)

Gregor1971

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Typo in pdf for pic32-t795h?
« on: December 08, 2013, 11:47:30 PM »
Hi,

looking at the memory map in the pdf https://www.olimex.com/Products/Duino/PIC32/PIC32-T795/resources/PIC32-T795_um.pdf i'm suprised about the upper limit (0x1FC02FEF) of the bootflash.

This means a gap of 16 bytes to the area of the device configuration registers. Is there any intent behind this or should the upper limit be 0x1fc02ffe?

Kind regards
Gregor

PS: The maps for kseg0 and kseg1 contain the same issue.

JohnS

  • Hero Member
  • *****
  • Posts: 1720
  • Karma: +33/-48
Re: Typo in pdf for pic32-t795h?
« Reply #1 on: December 09, 2013, 10:09:33 AM »
Check the data sheet.  It shows the config words are there I think.

John

Gregor1971

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: Typo in pdf for pic32-t795h?
« Reply #2 on: January 10, 2014, 08:41:57 PM »
Hi John,

a closer look at the documentation proves that you are right.

Thanks for your patience...

Regards
Gregor