February 26, 2024, 12:11:53 AM

MSP430 Programmer Problem

Started by yashvant, November 28, 2013, 10:39:58 AM

Previous topic - Next topic

yashvant

Hello Everyone,
I am using CCSU4 & MODPULSE Development board.
I succeed in creating hex file but when i use MSP430programmer to burn the code ,
It is showing me the error "NO Data loaded in Data section!"
What is the problem & How to remove this error?

Thank You.

LubOlimex

Hey,

Try with this hex: https://drive.google.com/file/d/0B7WHuNCASY8cM0Nyd1g3RklXanc/edit?usp=sharing. This is the default code of MOD-PULSE.

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

yashvant

Hi,
But how to remove this error "NO Data loaded in Data section!".
Because i have to make changes in my MODPULSE code.
I am using IAR Embedded Workbench 5.60.4 .
and Which IDE you are using?

Thank You So much.

LubOlimex

Hey,

If you use IAR you don't need Olimex MSP430 Programmer. Check the other threads you opened for more information on using TINY-V2 with IAR.

Olimex MSP430 debuggers are officially supported in IAR EW for MSP430.

You can write to IAR support. They provide quite comprehensive support for their software products.

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

yashvant

Thank You So much for your Support.

wtrieu

I have the same issue at the moment. I generate a hex file using IAR and wish to use the Olimex programmer to program my MSP430s. I wish to use this method to keep my source code private while supplying a working program for my boards.

Does anyone have a tip to solve this issue?

Thanks in advance.

wtrieu

Thought I might provide an update to help anyone else having the same problem. I simply changed the output in IAR EW to txt (the intel variant iirc), and it seemed to do the trick.

I am not entirely sure why the Olimex programmer did not like my hex files, but using txt solved my issue.

Cheers!