March 29, 2024, 12:36:31 AM

JTAg tiny v2

Started by yashvant, November 27, 2013, 02:05:26 PM

Previous topic - Next topic

yashvant

hi,
Can I program MSP430FG439 IC with Olimex JTAG Tiny v2?

LubOlimex

Hey again,

If you refer to this product: https://www.olimex.com/Products/MSP430/JTAG/MSP430-JTAG-TINY-V2/, then yes. You can program MSP430FG439 with it.

We even have a product with this micro-controller and I have programmed it with TINY-V2 multiple times. The product is MOD-PULSE: https://www.olimex.com/Products/Modules/Biofeedback/MOD-PULSE/ .

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

yashvant

hi,
We are also using MODPULSE Development board.
can i know how you Program it?
Thank You.

LubOlimex

Hello again,

The steps I follow:

1. I download and install the Olimex MSP430 Programmer software: https://www.olimex.com/Products/MSP430/JTAG/_resources/MSP_PROG_GUI_1.3.0.4_CLI_2.0.1.2_DLL_1.0.4.2.zip.

2. I download and extract the archive with the latest drivers for TINY-V2: https://www.olimex.com/Products/MSP430/JTAG/MSP430-JTAG-TINY-V2/resources/OLIMEX_MSP430-DLL_drivers.zip.

3. I browse the drivers folders and copy/replace the three files .dll from IDE_dlls folder to the main MSP430 Programmer folder (usually C:\Olimex\MSP430 Programmer).

4. I connect TINY-V2 debugger to the computer and to the board's JTAG connector and change the jumper P_IN/P_OUT to P_IN position (to power the board from the debugger).

5. I start Olimex MSP430 Programmer software, select MSP430FG439 from the drop-down "Device" menu and remove the tick from SpyBiWire option.

6. I click read/write etc in "Operations" section or "Quick & Easy".

Please check my picture:



Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex