Welcome, Guest

Author Topic: Jumpers for hardware i2c  (Read 2973 times)

slashdotted

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Jumpers for hardware i2c
« on: October 12, 2012, 12:29:20 PM »
Hello,
before doing some damage to my olinuxino maxi, I would like to ask... you how the jumpers to enable hardware i2c
are supposed to be soldered?

FYI here's an image of the board: http://imageshack.us/a/img842/732/maxir.png

Should I simply solder the center lead with the right lead for both SCL and SDA? If anybody can link a picture of the expected result it would be great.

thank you in advance

LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1914
  • Karma: +48/-3
Re: Jumpers for hardware i2c
« Reply #1 on: October 12, 2012, 03:04:06 PM »
Hey there,

Check this image with explanation: http://i.imgur.com/wh41X.jpg. Any guide or video you can find for setting SMD jumpers might prove useful.

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

slashdotted

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Jumpers for hardware i2c
« Reply #2 on: October 12, 2012, 04:18:23 PM »
thank you very much!  :)