Welcome, Guest

Author Topic: PIC-WEB erase/write cycles  (Read 2196 times)

bobdole

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
PIC-WEB erase/write cycles
« on: May 10, 2013, 08:35:28 PM »
What is the max amount of times you can program the PIC-WEB board via ICSP.
According to pic18f67J60 microchip datasheet its only 100 erase/write cycles.



LubOlimex

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1892
  • Karma: +47/-2
Re: PIC-WEB erase/write cycles
« Reply #1 on: May 13, 2013, 02:30:52 PM »
Hey bobdole,

100 writes/erases is the absolute minimum and 1000 cycles is the typical life(but in proper conditions it might reach more). You should check the table on page 441 of the datasheet : http://ww1.microchip.com/downloads/en/DeviceDoc/39762f.pdf. Param No. D130 is the one to look for.

Best regards,
Lub/OLIMEX
Technical support and documentation manager at Olimex

bobdole

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: PIC-WEB erase/write cycles
« Reply #2 on: May 15, 2013, 09:41:17 PM »
thats great, thanks for answering.