Oric Telestrat firmware for the Neo6502 (beta) on Prophet

Started by béné, Today at 01:21:07 AM

Previous topic - Next topic

béné

Hi all,

I have published a beta firmware that turns the Neo6502 into an Oric Telestrat (1986): TeleStrat 0.19.1, on my Prophet server.

https://prophet.3617.fr (firmware section)

How it works: the board's real W65C02S runs TELEMON, while the RP2040 serves the eight 16 KB banks and emulates the peripherals (two VIAs, AY-3-8912 sound, built-in Microdisc, ACIA 6551, ULA video over DVI). A boot menu (F1) loads disk images (.dsk), cartridges (.rom) and settings (TELESTRA.CFG) from the USB key; the menu is in English or French (L key). TELEMON 2.4, HYPER-BASIC, TELE-ASS, TELEMATIC, STRATORIC and the Oric BASIC ROMs are built in; they remain the property of their authors.

To install: put the board in BOOTSEL mode and copy telestrat.uf2 to the RPI-RP2 drive.

On my Neo6502 it boots TELEMON, STRATSED and HYPER-BASIC, PRINT and DIR work, and the 65C02 runs at 1 MHz with no video glitches.

Important: I have no real Telestrat, so I could not compare it with the original machine. If you own one, I would be very glad to hear about any difference in behaviour, timing or display.

Source code (zlib licence): https://github.com/benedictemarty/Neo6502TeleStrat

Feedback welcome!

béné