Hello,
I just bought some imx233-olinuxino-micro board for having fun and making personnal projects.
I burn a SD Card (8Gb) with a core-image-minimal very basic image by following the user manual. I let bootstrap as factory (boot by SD by Default).
I got this message looping on the DEBUG UART :
"Data Abort
r14_HSLCLC"
I really have no idea on what is it going on, but, I ran basic static tests on the board and it seems that the 2V5 generated by the internal imx233 DCDC is missing !
Have you guys ever met this issue ?
Thanks & Regards
Guillaume
What is that Linux image that you tried? First try with the official image from this archive:
https://ftp.olimex.com/IMX233_Images/ARCH/imx233_kernel_2.6_ARCH_FS_WIFI_release_5.img.7z
Extract the archive and download the image to the card with BalenaEtcher.
Hello ,
Thanks for quick answer LubOlimex, I just tried this image, and I got another loop on the Terminal :
r14_HTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFC
PowerPrep start initialize power...
Battery Voltage = 2.04V
No battery or bad battery detected!!!.Disabling battery voltage measurements.
LLCJun 14 201614:59:00
EMI_CTRL 0x1C084040
FRAC 0x92926192
init_ddr_mt46v32m16_133Mhz
power 0x00820710
Frac 0x92926192
start change cpu freq
hbus 0x00000003
cpu 0x00010001
LLLLLLLFCLJ
SWI
As I said previously, i am using a factory olinuxino-micro board, and the 2p5 voltage is missing (generated by imx233 DCDC and feeding the DDR). Which could explain the crash maybe at the memory boot process. I am using 5V / 1A jack supply.
Thanks & Regards,
Guillaume
Umm, this is not very typical. Did you try with another power supply?
Every board passes a number of tests here, including empirical one that boots Linux. How did you receive a board that doesn't boot. Maybe the board got damaged somehow? I have no idea.
I tested the same board and Linux image here. It seems to boot just fine. It looks like this:
HTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFC
PowerPrep start initialize power...
Battery Voltage = 0.64V
No battery or bad battery detected!!!.Disabling battery voltage measurements.
LLCJun 14 201614:59:00
EMI_CTRL 0x1C084040
FRAC 0x92926192
init_ddr_mt46v32m16_133Mhz
power 0x00820710
Frac 0x92926192
start change cpu freq
hbus 0x00000003
cpu 0x00010001
LLLLLLLFCLJUncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-8-ARCH+ (nobody@fermium) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 PREEMPT Fri Sep 21 17:02:25 UTC 2012
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: iMX233-OLinuXino low cost board
Memory policy: ECC disabled, Data cache writeback
INITRD: 0x40400000+0x00400000 overlaps in-use memory region - disabling initrd
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: noinitrd console=ttyAMA0,115200 root=/dev/mmcblk0p2 rw rootwait ssp1=mmc
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
allocated 327680 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 64MB = 64MB total
Memory: 60500k/60500k available, 5036k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xfde00000 - 0xffe00000 ( 32 MB)
vmalloc : 0xc4800000 - 0xf0000000 ( 696 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0028000 ( 128 kB)
.text : 0xc0028000 - 0xc03af000 (3612 kB)
.data : 0xc03ca000 - 0xc03f6000 ( 176 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:224
Console: colour dummy device 80x30
console [ttyAMA0] enabled
Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
regulator: vddd: 800 <--> 1575 mV at 1550 mV fast normal
regulator: vdddbo: 800 <--> 1575 mV fast normal
regulator: vdda: 1500 <--> 2275 mV at 1750 mV fast normal
regulator: vddio: 2800 <--> 3575 mV at 3300 mV fast normal
regulator: overall_current: fast normal
regulator: mxs-duart-1: fast normal
regulator: mxs-bl-1: fast normal
regulator: mxs-i2c-1: fast normal
regulator: mmc_ssp-1: fast normal
regulator: mmc_ssp-2: fast normal
regulator: charger-1: fast normal
regulator: power-test-1: fast normal
regulator: cpufreq-1: fast normal
i.MX IRAM pool: 28 KB@0xc4808000
usb: DR gadget (utmi) registered
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource mxs clock source
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Bus freq driver module loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 118
alg: No test for stdrng (krng)
cryptodev: driver loaded.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 90x30
mxs-duart.0: ttyAMA0 at MMIO 0x80070000 (irq = 0) is a DebugUART
mxs-auart.1: ttySP1 at MMIO 0x8006c000 (irq = 24) is a mxs-auart.1
Found APPUART 3.0.0
brd: module loaded
loop: module loaded
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci: irq 11, io base 0x80080000
fsl-ehci fsl-ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Freescale On-Chip EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-8-ARCH+ ehci_hcd
usb usb1: SerialNumber: fsl-ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
ARC USBOTG Device Controller driver (1 August 2005)
udc: request mem region for fsl-usb2-udc failed
fsl-usb2-udc: probe of fsl-usb2-udc failed with error -16
mice: PS/2 mouse device common for all mice
MXS RTC driver v1.0 hardware v2.0.0
mxs-rtc mxs-rtc.0: rtc core: registered mxs-rtc as rtc0
i2c /dev entries driver
WARNING : No battery connected !
Aborting power driver initialization
mxs-battery: probe of mxs-battery.0 failed with error 1
mxs watchdog: initialized, heartbeat 19 sec
mxs-mmc: MXS SSP Controller MMC Interface driver
ssp_set_rate: error -110
mxs-mmc mxs-mmc.0: mmc0: MXS SSP MMC DMAIRQ 14 ERRIRQ 15
dcp dcp.0: DCP crypto enabled.!
mxs-adc-audio mxs-adc-audio.0: MXS ADC/DAC Audio Codec
No device for DAI mxs adc/dac
No device for DAI mxs adc/dac
asoc: mxs adc/dac <-> mxs adc/dac mapping ok
ALSA device list:
#0: MXS EVK (mxs adc/dac)
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
registered taskstats version 1
mxs-rtc mxs-rtc.0: setting system clock to 1970-01-01 00:00:09 UTC (9)
Waiting for root device /dev/mmcblk0p2...
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD04G 3.70 GiB
mmcblk0: p1 p2 p3
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext2 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 128K
INIT: version 2.88 booting
> Arch Linux ARM
> http://www.archlinuxarm.org
------------------------------
:: Mounting Root Read-Only [BUSY] EXT4-fs (mmcblk0p2): re-mounted. Opts: barrier=1,data=ordered
[DONE]
:: Adjusting system time and setting kernel timezone [BUSY] [DONE]
:: Starting UDev Daemon [BUSY] <30>systemd-udevd[63]: starting version 186
[DONE]
:: Triggering UDev uevents [BUSY] [DONE]
:: Loading User-specified Modules [BUSY] [DONE]
:: Waiting for UDev uevents to be processed [BUSY] [DONE]
:: Configuring Virtual Consoles [BUSY] [DONE]
:: Bringing up loopback interface [BUSY] [DONE]
:: Unlocking encrypted volumes [BUSY] [DONE]
:: Checking Filesystems [BUSY] [DONE]
:: Remounting Root and API filesystems [BUSY] EXT4-fs (mmcblk0p2): re-mounted. Opts: barrier=1,data=ordered
[DONE]
:: Mounting Local Filesystems [BUSY] [DONE]
:: Activating Swap [BUSY] [DONE]
:: Configuring Time Zone [BUSY] [DONE]
:: Initializing Random Seed [BUSY] [DONE]
:: Removing Leftover Files [BUSY] [DONE]
:: Setting Hostname: alarm [BUSY] [DONE]
:: Saving dmesg Log [BUSY] [DONE]
INIT: Entering runlevel: 3
:: Starting Syslog-NG [BUSY] [DONE]
:: Starting Network [BUSY]
Error: unknown interface in /etc/rc.conf: `usb0'
[DONE]
:: Mounting Network Filesystems [BUSY] [DONE]
:: Starting crond daemon [BUSY] [DONE]
:: Starting Secure Shell Daemon [BUSY] [DONE]
Arch Linux 2.6.35-8-ARCH+ (ttyAMA0)
alarm login: