_HTLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLFC
PowerPrep start initialize power...
Battery Voltage = 1.88V
No battery or bad batterydetected!!!.Disabling batteryvoltage measurements./r/nLLCAug 22 201215:25:39
EMI_CTRL 0x1C084040
FRAC 0x92926192
init_ddr_mt46v32m16_133Mhz
power 0x00820710
Frac 0x92926192
start change cpu freq
hbus 0x00000003
cpu 0x00010001
LLLLLLLFCL0x80501001
on every power on above message displayed on RS232 debug port.
I am unable to find out hardware problem in my board. Any body help me to boot the linux on mini board.
Regards,
Pramod Kumar
Hi Pramod,
Looks like problem with your SD card. Make sure 1st partition is type 53 and copy kernel image on 1st partition. Also,try with other brand of SD card.