Hi,
I'm using the new SOM based on STM32MP1 micro to replace an old design based on A13-SOM.
I connected the SOM to an Olimex LCD display 7" (no touchscreen).
I downloaded the image "STM32MP1-OLinuXino-SOM-focal-minimal-20210821-133514.img.7z" and tried to boot from the generated SD. It works even if the console on the LCD display is not correctly centered.
I need the graphic environment to open a Chromium browser in a window on the LCD display.
How can I launch the graphic environment ? Is it supported on the standard image ?
Thanks in advance.
Currently, there is no software support for STM32 boards and the displays in Olimage image. We are working on such for a future release. Once it is available you would be able to configure the software for LCD output using the olinuxino-display script.
You still would need console access to the board to execute the script.
For more info refer to this document:
https://github.com/OLIMEX/OLINUXINO/blob/master/DOCUMENTS/OLIMAGE/Olimage-guide.pdf
Update: overlays for STM32P15x boards are now available, run:
sudo apt update
sudo apt upgrade
reboot the board and then run the:
script olinuxino-display
If this fails, maybe re-write the card with latest release from the repo here: https://images.olimex.com/release/stm32-som/